+86-371-67991755
Request Quote
When the melt gear pump is used, because of the operation relationship of various machine parts, it is easy to vibrate. The vibration phenomenon will have a certain impact on the use of the melt gear pump, so it is necessary to do a good job in vibra
Melt injection of polymer melt pump is a kind of technology to make non-woven fabric. It is a cloth formed by binding the fibers ejected after melting the raw materials. Add a layer of non-woven fabric which is easy to generate static electricity bet
In order to spin nanofibers, the spinneret hole of melt pump is much smaller than that of common melt spraying equipment. When NTI can be as small as 0.0635mm (63.5mm) or 0.0025in, the spinneret plate of module structure can be combined into a total
11
The deformation of the sealing surface is characterized by uneven wear on the end face of the moving ring seal, large wear near the inner diameter, narrow wear marks and serious linear contact. The main reason for deformation of sealing surface is im
Spinning pumps extrusion(ZB-U)
Polymer melt pump extrusion(ZB-
Plastic melt pump extrusion(ZB-
hot melt glue pumps for sale
batte Madden chemical pump
