Plastic Sheet Die
Plastic Sheet Die
Custom Plastic Sheet Die die cutting forces a flat plastic sheet (or the flat edge of a 3-dimensional part) against a cutting edge formed into a die. The result is a plastic piece shaped like the die.
Benefits
Plastic Sheet Die is normally faster and more cost-effective than other cutting or trimming processes such as routing. The trade-off is in the dimensional tolerances and edge finish of the part. A nominal tolerance for die cutting is +/- .020 inch, and it does not always produce a smooth, finished edge like routing. Routing tolerances can be significantly tighter, routinely achieving +/- .005 inch.
Typically, material being die cut is 1/8-inch thick or less.
Midland has used custom Plastic Sheet Die for such applications as:
Gaskets
Spacers
Flat Shapes
Trimming
Materials
Midland can produce custom Plastic Sheet Die parts from a wide variety of thermoplastic materials, although more brittle plastics such as acrylic may not yield a satisfactory result. We most frequently die cut these materials:
Application:stationery,advertisement,package
|
Item |
Specification |
|
Die steel |
P20/5CrNiMo |
|
Material |
PE/HDPE/LDPE/PA/PS/LDPP/HDPP/ABS/EVA/PC/PMMA |
|
Width of the die |
500mm-5000mm |
|
Thickness of the product |
0.2-2mm |
|
Choked flow rope |
90° |
|
Way of flow passage |
clothes rack type |
|
voltage |
220V/50hz |
|
Heating type |
heating inside |
|
Heater element |
stainless steel heating rod |
|
Mode of connection |
closed cycled connection |
|
Fastening piece |
12.9 high strength |
|
Precision of polishing |
Polishing precision of the stream surface of the die lip 0.03-0.04(μm)other parts is 0.04-0.05(μm) |
|
Galvanization |
the stream surface of the die head are treated by chrome treatment. Thickness 0.03-0.04(μm),hardness: 60-65Rockwellc,the chrome treatment thickness of the ektexine is 0.01-0.02mm. |
|
Installation |
according costumer’s request |
|
Way of charging |
central ring charging way |