How to choose the drive system of the melt blown metering pump?

The driving torque of the melt blown metering pump is related to the material characteristics, the displacement of the melt blown metering pump, and the high speed of the melt blown metering melt pump. For a certain material, its torque is proportional to its delivery volume (displacement of melt blown metering pump x speed of melt blown metering pump). As long as the output torque of the reduction box meets the required torque of the melt pump metering pump under its larger output, the use requirements of the melt blown metering pump can be met. By increasing the speed ratio of the existing reduction box, the output torque of the reduction box can be increased. Require.

When determining the driving system of batte zb-b high temperature melt pump, physical characteristics such as melt viscosity and fluidity should be considered. Materials with high melt viscosity and poor fluidity require a large torque, so the upper limit of the melt blown metering pump speed cannot be selected; the melt viscosity is small , The fluidity of the melt requires less torque. For the design of the drive system of the variable frequency motor and the frequency converter, try to avoid the frequency converter working at low frequency to prevent the insufficient drive torque of the drive system caused by the frequency converter working at low frequency. Melt blown metering pump manufacturers: info@battemachinery.com